You are here: Products  |  Press Room  |  Ryobi A1 Press

Ryobi 920 Series - A1 Size High-Speed Multi-Color Offset Press

Impressive Cost Performance - Ideal for A1-size Printing

8-up Printing of A4 Size and Letter Size

Enabling printing of A1-size posters as well as 8-up printing of both A4 size and letter size.

For printing an international A4-size booklet
For 8-up printing of 8.5" x 11" (letter-size )



Compatibility with a wide range of paper, from thin to heavy stock

The RYOBI 920 Series presses can handle paper thickness ranging from 0.04 mm (0.0016") onion skin to heavy 0.6 mm (0.024") card stock.

Lower Material Costs, Lower Power Consumption and Less Installation Space than a B1-size Press

Printing plate costs and power consumption are markedly lower than for a B1-size press, and the compact space-saving design allows efficient space utilization.


Reliable Mechanisms for High-Speed Printing

Suction Tape Feeder Board

The suction tape feeder board simplifies the setting of the brush and runner wheels and shortens the time required for changing the paper sizes. The suction belt holds the paper securely and feeds it smoothly to the front lay.

Double-Diameter Cylinder Printing Mechanism

The printing unit consists of a double-diameter impression cylinder and a double-diameter transfer drum. These cylinders have a large curvature ratio and transport paper with minimum flapping, providing stable paper transport even when printing on heavy stock.

Advanced Automated Systems Enable Efficient Job Changeover

  

RYOBI Semi-RPC Semiautomatic Plate Changer


allows quick and accurate plate changing without tools.
The operator merely sets the plate on the positioning pins and presses the button.
Automatic Cleaning Devices
Automatic blanket cleaning device (option), Automatic ink roller cleaning device (option)
Automatic Preset System for Convenient Job Changeover
The RYOBI 920 series allows the operator to enter preset values for paper size and thickness using the touch-panel display of the RYOBI PCS-G.
The positions of the feeder and delivery section guides and pull side guide can be preset*.
* The pull side guide preset system comes as standard equipment. Paper size preset and impression pressure preset systems are available as options.

  

RYOBI-matic-D Continuous Dampening System with Hickey Removing Function (option)

The RYOBI-matic-D substantially reduces hickeys on plates by adopting a drive mechanism for the water form roller that creates a rotational speed difference between the water form roller and plate cylinder.

Inline Varnish Coating Boosts Productivity and Adds Value

  

Inline Coating System

An aqueous or UV varnish coating can be processed inline using a retractable coating unit. When the varnish coating system is not being used, the entire coating cylinder and anilox roller can be easily slid upward at the touch of a button to prevent marking.


Automatic Convertible Perfecting Device Boosts Productivity  NEW

  

Automatic Convertible Perfecting Device Boosts Productivity

Switching between straight printing and perfecting can be performed remotely from the RYOBI PCS-G. Various perfecting device settings switch automatically to match the paper size. These include the open/close timing of the grippers on the strage drum and turning drum, the position of the paper tail edge suction mechanism*, and the phase of the turning drum and storage drum.

* paper tail edge suction ON/OFF switching is manual depending on the paper width.

  

One-pass full-color perfecting RYOBI 928P/9210P


Specifications

Model name
922
922P
924
924P
925
925P
926
926P
928P
9210P
Number of
printing units
2
4
5
6
8
10
With Convertible Perfecting Device
printing units
-
-
-
-
Max. Paper size
(W x L)
Straight printing: 920 x640 mm (36.22" x 25.20")
Perfecting: 920 x635 mm (36.22" x 25")
Min. Paper size
(W x L)
Straight printing: 410 x 290 mm (16.14" x 11.42")
Perfecting: 410 x 370 mm (16.14" x 14.57")
Max. Printing Area
(W x L)
900 x 615 mm (35.43" x 24.21")
Paper Thickness*1
Straight printing: 0.04 - 0.6 mm (0.0016" - 0.024")
Perfecting: 0.04 - 0.4 mm (0.0016" - 0.016")
Printing Speed*2
Straight printing: 3,000-16,200 S.P.H.
Perfecting: 3,000-13,000 S.P.H.
Plate Size
910 x 665 mm (35.83" x 26.18")
[positioning pin pitch: 780 mm (30.71")]
Feeder Pile
Capacity
800 mm (31.5")
Delivery Pile
Capacity
900 mm (35.43")
Design and specifications are subject to change without notice.

*1 There are some limitations to print thick paper depending on paper types.
*2 The local conditions, ink, stock, and printing plate types, and printing quality required will affect the max. printing speed.
 

Copyright 2014 by G.E. Richards Graphic Supplies [ Terms Of Use ] [ Privacy Statement ]